Dynamic Signaling Feature - ADEMCO N7227V5 Installation And Setup Manual

VISTA-10SE Installation and Setup Guide

Dynamic Signaling Feature

This VISTA-10SE control panel features Dynamic Signaling Delay (DSD) and Dynamic
Signaling Priority (DSP) message reporting when Long-Range Radio is used. These
message outputs are accessed through data field 93. The Dynamic Signaling feature is
designed to reduce the number of redundant reports sent to the central station.
The features are described as follows:
Dynamic Signaling Delay (DSD)
You can select the time the panel should wait for acknowledgment from the first
reporting destination before it attempts to send a message to the second destination.
Delays can be selected from 0 to 225 seconds, in 15-second increments. This choice is
made by the first entry in field 93. This delay is applicable to each individual message.
Dynamic Signaling Priority (DSP)
You can select the initial reporting destination for messages, Primary Dialer or Long-
Range Radio. This choice is made by the second entry in field 93.
The chart below provides a concise explanation of how the Dynamic signaling feature
functions.
If Priority ( 93, 2nd
entry) is...
Primary Phone No.
("0" entered)
Long-Range Radio
("1" entered)
You must enable field 27, OUTPUT TO LONG-RANGE RADIO, if this feature is to function.
9-2
And message is...
Acknowledged before delay
expires
Not acknowledged before delay
expires
Acknowledged before delay
expires
Not acknowledged before delay
expires
Then...
Message is removed from queue and
no message is sent to LRR.
Message is sent to both the Primary
Phone Number and LRR.
Message is removed from queue and
no message is sent to Primary
Phone Number
Message is sent to both the Primary
Phone Number and LRR.