Section 23. Specifications & Accessories; Specifications - ADEMCO N7227V5 Installation And Setup Manual

In This Section

Specifications

Specifications
VISTA 10SE Security Control
1. Physical: 12-1/2" W x 14-1/2" H x 3" D (318mm x 368mm x 76mm)
2. Electrical:
VOLTAGE INPUT: 16.5VAC from plug-in 25VA transformer, ADEMCO No. 1321
RECHARGEABLE BACKUP BATTERY: 12VDC, 4AH-17.2AH (Sealed Lead Acid).
Refer to the FINAL POWER-UP section to calculate the actual battery size needed.
Charging Voltage: 13.8VDC.
ALARM SOUNDER: 12V, 2.0 Amp output can drive 12V BELLS or can drive one or two
702 (series connected) self-contained 20-watt sirens. Do not connect two 702s in parallel.
AUXILIARY POWER OUTPUT: 12VDC, 600mA max. (500mA max for UL installations).
Interrupts for 4-wire smoke detector reset.
NOTE: For UL installations, Alarm Sounder plus Auxiliary Power currents must not
STANDBY TIME: (see Table in the FINAL POWER-UP section)
FUSE: Battery (3A) No. 90–12.
3. Communication:
Line Seize: Double Pole.
Ringer Equivalence: 0.7B.
FCC Registration No.: AC 398U–68192–AL–E.
6127 and 6128 REMOTE KEYPADS
1. Physical:
2. Electrical: Voltage Input: 12VDC; Current Drain: 20mA (6127); 30mA (6128)/
6137 REMOTE KEYPAD
1. Physical:
2. Electrical: Voltage Input: 12VDC; Current Drain: 85mA.
6138 & 6139 REMOTE KEYPADS
1. Physical:
2. Electrical: Voltage Input: 12VDC; Current Drain: 100mA
Specifications & Accessories
exceed 600mA total.
5-3/4" W x 4-3/4" H x 1" D (146mm x 121mm x 26mm).
6-1/4" W x 4-3/4" H x 1" D (159mm x 121mm x 26mm).
6-1/4" W x 4-3/4" H x 1" D (159mm x 121mm x 26mm).
S E C T I O N
Accessories
2 3
23–1