Dss Keys - Avaya 20CC Manual

DSS Keys

Setting Up a DSS Key
Using DSS Keys
BLF Status Lamps
40DHB0002UKAJ Issue 3 (04/03/2002)
The 20CC has eight DSS keys along its right-hand edge. Each of these
keys can store an extension number (or group number for paging). They
then allow you to dial those numbers in a single key press.
You can also use DSS keys to dial your personal speed dial numbers (see
page 7).
To set a DSS/BLF key directory number:
1. Press PROGRAM and then the DSS key to use.
2. Enter the phone's passcode (see page 26).
3. The display shows the current stored number (if set).
4. Press CANCEL and dial the number to store.
5. Select another DSS key and enter the required details.
6. Press DONE then PROGRAM to finish.
Once setup, you can use the DSS key for the following actions. You can
also use DSS keys to dial personal speed dial numbers (see page 7).
To make internal calls:
Press the DSS key storing the extension or group number.
To pickup calls:
Press the DSS key storing the ringing number (this will be giving a fast red
flashing for an extension or fast green flash for a group), the call details are
shown. Press ANSWER RELEASE to answer the call.
To make a page call:
Press PAGE and then the DSS key storing the extension or group
number.
The DSS keys on the 20CC incorporate dual-colour BLF lamps. These
show the status of the number stored under the DSS key.
Red BLF Lamp Signals: Calls to/from other extensions.
• Fast Flash: Extension ringing.
• Solid: Extension or line busy.
Green BLF Lamp Signals:
• Fast Flash: Calls to a group.
DSS Keys – Page 17
IP Office - 20CC Turret Phone