Configuring Direct Calls Between Two Telepresence Instances - Avaya XT Telepresence Deployment Manual

You can create triplets using XT series Telepresence instances or using third party Telepresence
instances. You can only create duplets using third party Telepresence instances.
For more information, see
With duplets, there is a slave device (slave 1) and a master device. With triplets, there are two
slaves and a master device. The slaves are called slave 1 and slave 2.
Related links
Configuring the Avaya XT Telepresence

Configuring direct calls between two telepresence instances

Configuring direct calls between two telepresence instances
About this task
You can directly call a telepresence instance from another remote telepresence instance using
your favorite contacts. To enable this functionality, you must create a special contact representing
a Telepresence instance. This contact is called a Meeting Call Favorite contact. You must create it
on your Avaya XT Telepresence master endpoint.
August 2020
Figure 61: Triplet configuration
About Avaya XT Telepresence
Figure 62: Duplet with single slave and master
Figure 63: Triplet with two slaves and master
on page 36
Avaya Video Conferencing XT Telepresence Deployment Guide
Comments on this document? infodev@avaya.com
Direct calls between two telepresence instances
on page 7.
on page 81
81