Access Data; Operating Instructions - Porsche Mobile Charger Connect Operating Manual

Operating Instructions

Access Data

US
A letter containing access data, which contains all
the data you need for the charger and the web
application, is supplied with your device.
FC
e Keep the letter containing access data in a safe
place.
ESM
Information
If you lose the access data that is valid upon delivery
PTB
of your device, e.g. the preset PIN and the initial
password, please contact your authorized Porsche
TR
dealer.
– Have the serial number of the charger ready.
f Please see chapter "Serial number of the
RU
charger" on page 6.
The letter containing access data contains the
UK
following data:
Designation Meaning
VIE
Serial Number Serial number of the charger
Wi-Fi MAC MAC address of WiFi interface
HE
MAC address of domestic PLC
GRID MAC
interface
AR MAC address of vehicle PLC
Vehicle MAC
interface
– SSID WiFi access point
JPN
Wi-Fi SSID
– Host name
Wi-Fi PSK Network key
KOR
Password Initial password for Home user
Home user web application
CHS Password
Initial password for Customer
Customer
service web application
service
CHT
PIN Personal ID number
PUK Personal unlocking key
THA
6
Information
The security field contains the necessary access
codes (PIN and PUK). This field has special ink
covering these codes.
The codes are only visible when this field is
dampened in running water.
Do not rub or scratch the field while dampening it,
as the codes could also be damaged.
PIN and PUK
The PIN and PUK are used for unlocking the charger.
e If you lose or forget a PIN you set yourself, unlock
the charger by entering the PUK and set a new
PIN.
e If you lose or forget the PUK, contact your
authorized Porsche dealer.
Password for web application
The password is used for logging into the web
application.
When using the initial password:
e If you lose or forget the initial password, contact
your authorized Porsche dealer.
When using a password you set yourself:
e If you lose or forget a password you set yourself,
reset the charger to factory settings and thereby
re-activate the initial password (S
F ).
ACTORY SETTINGS
Serial number of the charger
The serial number of the charger can be found in the
following places:
– In the letter containing access data after the
designation "Serial Number"
– On the identification plate (on the back of the
control unit) after the abbreviation "SN"
– On the charger: S
– In the web application: S
D
EVICE INFORMATION
Porsche ID
When the charger is paired to your Porsche ID,
information about the charger and the charging
processes can be displayed in My Porsche and
in the Porsche Connect app.
If you will no longer be using the charger, e.g. if you
sell it:
1. Unpair the charger from your Porsche ID
(S
ETTINGS
2. Reset the charger to factory settings
(S
ETTINGS
Operating Instructions
In some countries, the relevant authorities must be
notified when you connect electric vehicle charging
equipment.
e Check obligation to notify the authorities and
legal requirements for operation before
connecting charging equipment.
NOTICE
e Always place the charger on a solid surface when
charging.
>
ETTINGS
e Porsche recommends that you use the charger in
the basic wall mount or in the charging dock.
e Do not immerse or submerge the charger in water.
e Protect the charger from snow and ice.
e Handle the charger with care and protect it from
potential damage due to being driven over,
dropped, pulled, bent or crushed.
e Do not open the charger housing.
> I
ETTINGS NFORMATION
> M >
ETTINGS AINTENANCE
> U ).
SER PROFILES
> F ).
ACTORY SETTINGS
Damage to the charger