Safety Instructions - Porsche Mobile Charger Connect Operating Manual

Safety Instructions

Electric shock, short
DANGER
circuit, fire, explosion
Use of a damaged or incorrect charger and a
damaged or incorrect electrical socket, improper use
of the charger or failure to observe the safety
instructions can cause short circuits, electric shocks,
explosions, fires or burns.
e Only use accessories, e.g. supply and vehicle
cables, that have been approved and supplied
by Porsche.
e Do not use a damaged and/or soiled charger.
Check the cable and plug connection for damage
and soiling before use.
e Only connect the charger to properly installed and
undamaged electrical sockets and fault-free
electrical installations.
e Do not use extension cables, cable reels, multiple
sockets or (travel) adapters.
e Disconnect the charger from the power grid
during thunderstorms.
e Do not modify or repair any of the electrical
components.
e Only get experts to correct faults and carry
out repairs on the charger.
Electric shock, fire
DANGER
Incorrectly installed electrical sockets can cause
electric shock or fire when the high-voltage battery is
charged using the vehicle charge port.
e Power supply testing and installation and initial
operation of the electrical socket for the charger
may only be carried out by a qualified electrician.
The qualified electrician is fully responsible for
compliance with the relevant standards and
regulations. Porsche recommends that you
use a certified Porsche service partner.
e The charger should only be operated in properly
earthed power supply systems. Operation in non-
earthed systems (e.g. IT networks) is not possible.
e The cross-section of the power cable for the
electrical socket is defined in accordance with the
wire length and the locally applicable regulations
and standards.
e To ensure uninterrupted charging, we
recommend that you only use electrical sockets
that are connected via a separately fused electric
circuit for charging.
e The charger is designed for use in the private and
semi-public sector, e.g. on private property or in
company parking lots.
e Unauthorized persons (e.g. playing children) or
animals must not have access to the charger or
the vehicle during unsupervised charging.
e Please read the safety instructions in the
Installation Instructions and the Owner's Manual.
Safety Instructions
Electric shock, fire
DANGER
Incorrect handling of the plug contacts can lead to
electric shock or fire.
e Do not touch the contacts on the vehicle charge
port and charger.
e Do not insert any objects into the vehicle charge
port or charger.
e Protect electrical sockets and plug connections
against moisture, water and other liquids.
Flammable or explosive
WARNING
vapors
Components of the charger can cause sparks and
ignite flammable or explosive vapors.
e To reduce the risk of explosion, particularly in
garages, make sure that the control unit is
located at least 19.7 in. (50 cm) above the floor
during charging.
e Do not install the charger in potentially explosive
areas.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. This equipment generates,
uses and can radiate radio frequency energy and,
US
FC
ESM
PTB
TR
RU
UK
VIE
HE
AR
JPN
KOR
CHS
CHT
THA
3