Scope Of Supply Access Data - Porsche Mobile Charger Plus Manual

Scope of supply
Fig. 19 Scope of supply
Supply cable (permanently attached to the control
A
unit or detachable)
Power plug for connecting to the mains supply
B
Control unit
C
Vehicle plug (connector plug for the vehicle) coun-
D
try-dependent (type 2 plug shown)
Vehicle cable (permanently attached to control
E
unit)
Letter containing access data
F
Information
Optional components: Various wall mounts are availa-
ble for the charger, depending on the country, e.g. the
basic wall mount.
50
Access data
A letter containing access data, which contains all the
data you need for the charger and the Web Applica-
tion, is supplied with your device.
e
Keep the letter containing access data in a safe
place.
Information
If lost, the access data valid upon delivery, such as
the initial password, can be obtained from a Porsche
partner.
− Have the serial number of the charger ready.
Designation Meaning
Serial number Serial number of the
charger
Security ID For secure connection
with the PLC modem
MAC MAC address of home
network PLC interface
Web password Initial password for the
Web Application
Web host name For connecting to the
Web Application via a
web browser
PUK Personal unlocking key
PUK
The PUK serves to reactivate the initial password.
e
If you lose or forget the PUK, contact your Por-
sche partner.
Information
The security field contains the unlocking key (PUK).
This field is printed over with a special ink that covers
the PUK.
Only after moistening this field under running water
does the ink fade, making the PUK visible. Do not rub
or scratch the field while dampening it, as the PUK
could otherwise be damaged.
Web application password
The password is used for logging into the Web Appli-
cation.
When using the initial password:
e
If you lose or forget the initial password, contact
your Porsche partner.
When using a password you set yourself:
e
If lost, the initial password can be restored using
the PUK. Alternatively, please contact a Porsche
partner.
e
By resetting the charger to the factory settings,
the initial password is reactivated. However, this
causes all settings to be reset to the factory
settings.