Access Data; Operating Instructions - Porsche Mobile Charger Connect Operating Manual

Hide thumbs Also See for Mobile Charger Connect:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Operating Instructions

Access data

US
A letter containing access data, which contains all
the data you need for the charger and the web
application, is supplied with your device.
FC
e Keep the letter containing access data in a safe
place.
ESM
Information
If you lose the access data that is valid upon delivery
PTB
of your device, e.g. the preset PIN and the initial
password, please contact your authorized Porsche
TR
dealer.
– Have the serial number of the charger ready.
f Refer to chapter "Serial number of the
RU
charger" on page 6.
The letter containing access data contains the
UK
following data:
Designation
Meaning
VIE
Serial number
Serial number of the charger
WIFI MAC
MAC address of WiFi interface
HE
MAC address of domestic
GRID MAC
PLC interface
AR
MAC address of vehicle
Vehicle MAC
PLC interface
– SSID of WiFi access point
JPN
SSID: WiFi
– Host name
PSK
Network key
KOR
Initial password for Home user
Web Home User
web application
CHS
Initial password for Customer
Web Tech User
service web application
CHT
PIN
Personal ID number
PUK
Personal unlocking key
THA
6
PIN and PUK
The PIN and PUK are used for unlocking the charger.
e If you lose or forget a PIN you set yourself,
unlock the charger by entering the PUK and set
a new PIN.
e If you lose or forget the PUK, contact your
authorized Porsche dealer.
Password for web application
The password is used for logging into the web
application.
When using the initial password:
e If you lose or forget the initial password, contact
your authorized Porsche dealer.
When using a password you set yourself:
e If you lose or forget a password you set yourself,
reset the charger to factory settings and re-
activate the initial password (S
ETTINGS
).
F
ACTORY SETTINGS
Serial number of the charger
The serial number of the charger can be found in the
following places:
– After "Serial number" in the letter containing
access data
– After "SN" on the identification plate (on the back
of the control unit)
– On the charger: S
> I
ETTINGS
NFORMATION
– In the web application: S
> M
ETTINGS
D
EVICE INFORMATION
Porsche ID
When the charger is paired to your Porsche ID,
information about the charger and the charging
processes can be displayed in My Porsche and in
the Porsche Connect app.
If you will no longer be using the charger,
e.g. if you sell it:
1. Unpair the charger from your Porsche ID
(S
> U
ETTINGS
2. Reset the charger to factory settings
(S
> F
ETTINGS
Operating Instructions
In some countries, the relevant authorities must be
notified when you connect electric vehicle charging
equipment.
e Check obligation to notify the authorities and
>
legal requirements for operation before
connecting charging equipment.
NOTICE
e Always place the charger on a solid surface when
charging.
e Porsche recommends that you use the charger in
the basic wall mount or in the charging dock.
e Do not immerse or submerge the charger in water.
e Protect the charger from snow and ice.
e Handle the charger with care and protect it from
>
AINTENANCE
potential damage due to being driven over,
dropped, pulled, bent or crushed.
e Do not open the charger housing.
1) In Switzerland, the charger may only be used in the basic
wall mount or in the charging dock.
).
SER PROFILE
).
ACTORY SETTINGS
Damage to the charger
1)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents