Table of Contents
Advertisement
(2) Install the rail installation plate assembly in the VTR with
two screws.
Note: The installation method varies depending on the
direction in which the VTR to be mounted is
pulled out. Therefore, install it referring to the
figure.
. BKFC-53
(for BETACAM, HDCAM, MPEG IMX and S-VHS VTRs)
VTR
.
NOTES :
A machine having a product code ending with –0
cannot be installed on the BETACAM UVW series.
.
A machine having a product code ending with –0 or
–1 cannot be installed on the digital BETACAM DVW
series, BETACAM SX VTRs and HDCAM VTRs.
.
A machine having a product code ending with –0, –1
or –2 cannot be installed on the MPEG IMX VTRs.
4-32
RAIL BRACKET ASSY
SCREWS
(+B 4x12)
FRONT DRAWING
VTR DRAWING
DIRECTION
ATTACHMENT HOLE
(LOWER)
BKFC-53 (S-VHS SERIES)
VTR DRAWING
DIRECTION
ATTACHMENT HOLE
(UPPER)
BKFC-53
REAR DRAWING
ATTACHMENT HOLE
(LOWER)
BKFC-53 (S-VHS SERIES )
ATTACHMENT HOLE
(UPPER)
BETACAM SERIES
BKFC-53
HDCAM VTRs
MPEG IMX VTRs
ATTACHMENT HOLE
ATTACHMENT HOLE
BETACAM SERIES
HDCAM VTRs
MPEG IMX VTRs
VTR DRAWING
DIRECTION
ATTACHMENT HOLE
VTR DRAWING
DIRECTION
ATTACHMENT HOLE
BFC-1
Advertisement
Table of Contents
