Sony FLEXICART BFC-1 Installation Manual page 20

4-4. CONSOLE FIXING
After installation, it is recommended to fix the console to prevent
danger such as fall.
1. Cart machine console fixing
Install the console on a flat and firm place, lower the floor
leveler of the console until they contact the floor.
Turn the floor levelers half another after they touch the floor
to fix the console.
(to opposite side of wrench: 30 mm)
2. Fixing from the ceiling
Two eye bolt holes are at the top plate. Mount eye bolts at
the holes to fix the console and ceiling, pole or wall with
chain or rope.
(screw diameter of eye bolt: M12)
Note: Be sure to don't put up by the eye bolt.
4-4
FLOOR LEVELER
Tigten the eye bolts with bar.
EYE BOLTS
BFC-1