Screw (+B 4X6) X4 - Sony FLEXICART BFC-1 Installation Manual

(9) Pull out the outer member from the outer rail assembly and
tighten the four screws shown in the figure.
2. VTR installation
(1) Remove two screws from the rail installation plate removed
in step (8) of procedure 1, then remove the inner rail.
(2) Remove the screws shown in the figure of the VTR's side
panel.
4-16
OUTER RAIL ASSY
OUTER
MEMBER
RAIL BRACKET ASSY
SCREW
(+B 4x6)
HOLES FOR RACK MOUNT
SCREWS
DVR-10/20
HOLES FOR RACK MOUNT
SCREWS
DVR-18/28
SCREWS
SCREW
(+B 4x6)
INNER RAIL
BFC-1