Sony FLEXICART BFC-1 Installation Manual page 45

(4) Be careful not to pull out the outer rail in the incorrect direc-
tion. Fix the outer rail assembly to the cart machine tenta-
tively with four screws (four on the right and left, each).
(Tighten the screws so that no play occurs.)
Note: For the installation place (hole), refer to the fig-
ures for the VTR installation position.
(5) Slide the rail installation plate as far as it will go and con-
firm the following.
. The pin of the rail installation plate is put in the hole of the
guide plate.
. The guide pin is put in the hole of the rail installation plate.
BFC-1
OUTER RAIL
ASSEMBLY
PLATE NUT F
GUIDE PIN
SCREWS FOR
OUTER RAIL
ATTACHMENT
(+B 4x8)
< OVER VIEW >
OUTER RAIL
SCREW
GUIDE
PLATE
RAIL INSTALLATION
PLATE
SCREWS FOR
OUTER RAIL
ATTACHMENT
(+B 4x8)
FRAME
(BFC-1)
PLATE NUT
FRAME
PIN
GUIDE PIN
HOLE
4-29