Table of Contents
Advertisement
S
ETUP
Power Supply
Car Adapter
Connection
To connect the car
adapter
NOTE
To remove the car
adapter
24
The car adapter is an optional accessory. You can use the car adapter to provide
power to the NURIT 8000 and to charge the installed Lithium-polymer battery.
For information on ordering a car adapter for the NURIT 8000 terminal, see
Accessories and
Documentation.
Connect one end of the car adapter cable to the Power port on the back of the
terminal and the other into the vehicle's electrical power socket.
Figure 16
Car Adapter Power Supply Connection
The LED indicator on the car adaptor indicates the charge status of the battery,
as described in
Battery Charge
Unplug the car adapter from the vehicle's electrical power socket and then from
the power connector, at the front of the NURIT 8000 terminal.
Status.
NURIT 8000 I
G
NSTALLATION
UIDE
Advertisement
Table of Contents
