Table of Contents
Advertisement
S
ETUP
Using the Smart Card Reader
Using the Smart
Card Reader
To use the smart card
reader
NOTE
28
The EMV-compatible smart card reader is located at the bottom end of the NURIT
8000 terminal. Use the smart card reader with a smart card.
1
Hold the smart card horizontally, with the metal chip facing up and at the edge
of the card nearest to the smart card reader slot.
2
Insert the card into the smart card reader slot.
Figure 21
Inserting Smart Card
3
Remove the card when prompted by the POS terminal, depending on the
specific application being used.
For guidance, a pictogram near the card slot indicates how to insert the smart
card into the smart card reader. In addition, insertion direction arrows may be
engraved or inscribed on the smart card.
NURIT 8000 I
G
NSTALLATION
UIDE
Advertisement
Table of Contents
