Hapter; Setup; Selecting Location; Ease Of Use - VeriFone 8000 Installation Manual

Setup

Selecting
Location
Ease of Use •
Environmental
Factors
This chapter describes the setup procedure for NURIT 8000, in the following
sections:
•

Selecting Location

•
Unpacking Shipping Carton
•
Examining NURIT 8000 Features
•
Opening and Closing Battery/Card Compartment Cover
•
Connecting Cables
•
Connecting the Battery
•
Connecting Cables
•
Power Supply
•
Connecting Cables
•
Using the Magnetic Stripe Card Reader
•
Using the Smart Card Reader
Use the following guidelines to select a location for the NURIT 8000.
When not operated from its hand-held position, place the NURIT 8000 on a
flat table or countertop close to the power outlet and any peripherals.
•
Maintain good ventilation.
•
Do not use the unit where there is high heat, dust, humidity, moisture, or
caustic chemicals or oils.
•
Do not use the NURIT 8000 in a known blasting area.
•
Do not use the NURIT 8000 in an area of potential explosive atmosphere,
such as fuel or chemical storage or transfer facilities, or in any area where you
would be advised to turn off a vehicle's engine.
•
Do not cover slots and openings of the device. They may be provided for
ventilation and protection against overheating. Never place the device near
radiators, or in a place where proper ventilation is not provided.
•
Do not cover the terminal.
C

HAPTER

NURIT 8000 I G
NSTALLATION
2
9
UIDE