Via Point Input - VDO MS 4150 RS MP3 Installation And Owner's Manual

NAVIGATION

Via point input

If you wish to visit other locations en route to the
entered destination address, these can be stored as
via points. The navigation system then plans the route
to include the via points in the given sequence before
the destination address is reached.
When you reach a via point, you will hear "You have
arrived." The navigation system will immediately begin
to plan the route to the next via point or the final
destination.
In the address manager or on the "
via points you have not reached yet or which you do not wish to visit any longer.
➽ page 58 or 65.
In the main control, select "Via point input".
:
The "Via point input" menu appears.
The following options are available in the "
New address
Input country, city, road, number or junction or special facility as via point.
Load address
Loading an address stored in the address book as a via point.
Last destin.
Recall one of the 10 addresses last used for guidance to load as a via point.
Info on car pos.
Loading a special facility in the vicinity of the current position of the car.
Geo. Long-/Latit
Entering a destination by means of GPS coordinates (geographic latitude and longitude).
Travel info
If you have enabled a C-IQ Travel Info product (e.g. Varta, Michelin, etc.) you can search
specifically for particular facilities and transfer them directly as the via point.
The input of a via point is identical to the input of a destination address.
Viapoint input is limited in the same way as destination input when the map CD is not
inserted.
50
" information screen you can delete
" menu: