RADIO
Setting frequency manually
Activate "Manual tuning" in the radio menu. ➽ next page.
Slowly turn the right rotary control to the right or left in order to change
the reception frequency step-by-step.
Turn the control quickly by a few notches in order to start a fast search.
Press the control to stop the search.
Press the control again to return to the automatic search.
✎
After 50 seconds, the radio switches back to automatic waveband tuning.
Presets
You can store 6 stations for each waveband on the preset buttons from 1 to 6.
Tune to the desired waveband and station.
Press the desired preset button until you hear a confirmation tone.
✎
The station selected is stored on the preset button.
✎
Stations cannot be stored manually in the FM AS and MW AS wavebands, these are
used exclusively for the Autostore function. ➽ "RADIO" menu.
Recalling stored stations
Tune to the desired waveband.
Press one of the preset buttons in order to recall the desired station.
The "RADIO" menu
In radio mode:
Press the MENU button.
:
The "
" menu is displayed.
The following functions are available:
RDS Memo (only in FM)
Searches for all currently available RDS stations and
stores them in alphabetic order in the station list.
Activate this function to refresh the RDS Memo.
✎
Refreshing the RDS Memo may require up to 30 seconds.
Autostore
Activate this function to automatically store up to 6 FM/AM stations with strong
signals on the FM AS or AM AS waveband.
Station list (only in FM)
Select a station from the alphabetically sorted stations list (RDS Memo).
Preset list
Select a previously stored station from the preset list for the selected waveband,
FM, MW, SW or LW.
30