Page 3
10 1 1. Flip Down panel release button 16. Radio preset 6 button/PAUSE & PLAY 2. Volume rotary button 17. Radio preset 5 button/STOP 3. Power ON/OFF button 18. Radio preset 4 button 4. BAND button 19. Radio preset 3 button/SCN 5.
Page 4
Release Panel Insert Panel ** For this accessory, contact your dealer Green - Power remote) (Red) Line out-Black C1 C2 (White) (Red) AUX IN-GREY (White) Line out AMP control External IR TEL MUTE HIGH (PINK) TEL MUTE LOW (GREY) HAND BRAKE CONTROL(Orange) Tel Mute (Low active)-Gray Multimedia control (Yellow)
BEFORE YOU START... Preference Set Up ......19 Special Feature Functions ....19 Thank you for purchase this product Specification........21 which has been designed and Maintenance ........22 manufactured to the highest standards Trouble shooting ......... 23 and subjected to rigorous testing. Kindly familiarise yourself with the product HINTS FOR CORRECT AND SAFE by reading this user manual.
• Avoid installing the unit where it would DIN REAR-MOUNT (Method B) be subject to high temperature, such Installation using the screw holes on the as from direct sunlight, or from hot air, sides of the unit. from the heater, or where it would be subject to dust, dirt or excessive vibration.
LOCATION AND FUNCTIONS KEYS Power Long press POWER to turn the unit ON or OFF. Short press to MUTE the set 2. 0-9 Numeric buttons for preset/Tracks selection. 3. SMART In DVD mode, press it shortly to enter SMART MODE function. (For details, refer to the SMART mode function description) 4.
Function selection mode OPERATION SET UP mode operation Long press DISP button (8) more than 2 seconds to activate the set up mode and change the desired setting accordingly. Set-up mode Subject Options Illumination Color 1 / 2 / 3 Bleep level BLEEP OFF, 1, 2, 3, 4 Manual Clock...
Display key (on Remote Control): Sequential information shows on OSD monitor Tuner Mode CD Mode MP3 Mode VCD Mode DVD Mode no action 1) single elapsed 1) single elapsed 1) single elapsed 1) title nr/ total little nr/ chapter nr/ total.
RESET FREQ SCAN RESET button (25) is placed on the front Press up/down buttons (13/14) shortly panel and must be activated with either a to scan all frequency throughout the ball point pen or thin hard object. entire band. The RESET button (25) is to be activated Note: SCAN in SETUP mode has to be for the following reasons: turned on before it can function.
Using PTY to Select Program interrupt it by short press of TA button (9) without switching off the TA mode. The PTY function allows you to search for stations with a particular Program Type. By doing so, the set will return to the To select your program type, long press previous operating mode.
CD/MP3 OPERATION b) When folder is turn off: Press one time - repeat one track This CD player is suitable for 12cm press second time - repeat off. disc only, do not use 8cm or irregular SCAN TRACKS shaped CD. During CD operation, press SCAN (19) in On top of the usual CD audio disc headunit or SCAN (2) in remote control to...
- To display up to 28 characters for a - Each time the button is pressed, track name or artist’s name, ID3TAG the speed of fast forward/reverse version 1.1 is required. Characters changes as follows: other than uppercase/lowercase Normal - >2x - >4x - >6x - >8x letters (“Aa to Zz”) and underscore Skipping chapters/tracks (“_”) may not be displayed.
OSD (ON SCREEN DISPLAY) - Total REMAIN (only when PBC is off) - Clear message on screen. Time displays MP3 (with Folder ON) Press the DISP button (8) in headunit or Each time the DISP button is pressed, (10) in remote control during playback to the time displayed changed in the display different time information on the following order:...
- Press the ENTER button to playback buttons. You can select the desired file the selected item. or the desired directory using the buttons. The screen shows: - Press the ENTER or button to start 00 : 00 : 25 a slide show, beginning with the MP3/JPG MENU selected file.
To adjust the colour, contrast and GENERAL SETUP brightness of the headunit, do the following: - - GENERAL PAGE - - - In DVD mode, press STOP button (17) TV DISPLAY NORMAL/PS in headunit or STOP button (4) in TV TYPE NORMAL/LB remote control.
bitstream and assume interlace at AUDIO-SETUP all times. • SMART: Same as AUTO mode, - - AUDIO SETUP - - usually be used for progressive and OP MODE interlaced material with limited motion. DUAL MONO • SSMART: motion adaptive D R C deinterlacing is used only for pictures marked as interlaced but not for MAIN PAGE...
DUAL MONO PASSWORD - Select the desired Dual mono mode - Select CHANGE to change the factory for 1+1 coded Dolby Digital programs. set password for parental control. Key in the initial factory password of 3308. • STEREO: Stereo-reproduction 1+1 Then key in a new 4 digit password.
Page 20
INFRARED REMOTE CONTROL AUX IN Infrared remote control is included in You can connect the audio output of this set. auxiliary equipment to the headunit via RCA cables. • Preparing the Remote Control Inserting the Batteries - connect red socket to right channel. 1.
MAINTENANCE For CD/MP3/VCD/DVD Player As dust tends to accumulate in the The following suggestions help you care CD slot, clean it every once in a while. for the product so that you can enjoy it for Your CDs CD/MP3/VCD/DVD can get years.
TROUBLE SHOOTING Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. Symptom Cause Solution No power. The car ignition is If the power supply is properly connected to the not on.