Default Settings; Language/Measuring Units - VDO MS 4150 RS MP3 Installation And Owner's Manual

NAVIGATION
I
Delay
Use this value to indicate the anticipated delay time due to a traffic obstruction at or
above which the navigation system should suggest that a new route be planned. Select
a value between 5 and 60 minutes.
✎
The anticipated delay is calculated on the basis of the data received from the TMC
station and may deviate from the actual situation.
I
Automatic
Switches the automatic mode for dynamic route planning on/off.
✎
Automatic mode is switched off in the factory settings.
Language
Choose one of the two languages loaded in the system,
or:
Select "
language from the system software CD (included).
Select the language to be replaced.
:
You will be prompted to insert the software CD.
Insert the language CD in the CD player of the radio.
Follow the system instructions for loading other languages.
✎
Some of the extended voice information may not be available for all voices. We
therefore recommend only loading the voice designated as "new" in the desired
language from the software CD.
I
Turn now advice
If this option is activated, an additional prompt (e.g. "Now turn right") will be output
directly before a turn-off.
✎
This prompt is activated by default.
Measuring units
Choose between the following units of measurement for distance:
–
Metric: Display in kilometres and metres.
–
Anglo: Display in miles and yards.
–
American: Display in miles, half and quarter miles and feet.

Default settings

Select this option in order to reset all user-defined settings to their default values. All
entries in the address book will remain stored.
Mounting angle
To adapt the navigation computer to the mounting angle of the radio in the
dashboard (gyro-sensor compensation). This adjustment need only be made once after
the installation of the radio. See "Setting the mounting angle", ➽ page 20.
70
" to replace one of the two loaded languages with another