Installing The Seat - CYBEX ATON Short Manual

19

INSTAllING THE SEAT

• make sure that the carrying handle a is in the upper
position A (see page 9).
• Place the seat against driving position on the car
seat (the feet of the baby point in the direction of the
backrest of the car seat).
• CyBex Aton can be used on all seats with a three-
point automatic retractor belt. we generally recommend
to use the seat in the back of the vehicle. in the front,
your child is usually exposed to higher risks in case of
an accident.
WARNING! the seat must not be used with a two-
point belt or a lap belt. when securing your child
with a two-point belt, this may result in injuries or
death of the child.
• make sure that the horizontal marking on the safety
sticker p is parallel to the fl oor.
• Pull the three-point belt over the child seat.
• insert the belt tongue into the car belt buckle q.