Installing The Seat - CYBEX ATON CBX User Manual

Hide thumbs Also See for ATON CBX:

Table of Contents

Available languages

Enlarged version

INSTALLING THE SEAT

• Place the infant car seat facing the rear of the vehicle on the

vehicle seat.

• Ensure, that the carrying handle (2) is locked in car postion A

(see page 17.)

• Ensure that the installation mark on warning sticker (10), located

on the side of the infant car seat, is aligned with the floor of the

ла

vehicle.

• Pull out the vehicle seat belt and route it over the infant car seat.

• Place the lap belt (12) into blue belt routings (13) on both sides

of the infant car seat.

• Lock the buckle tongue in place in vehicle seat belt (11).

• Tighten lap belt (12) by pulling on diagonal belt (14) in the

direction of the front of the vehicle.

• Pull diagonal belt (14) behind the head end of the infant car seat.

Note! Do not twist the vehicle seat belt while doing this.

нь

• Bring the diagonal belt (14) into the blue belt slot (15) on the

back.

• Tighten the diagonal belt (14).

4).

WARNING! The seat must not be used with a two-

point belt or a lap belt. When securing your child with

a two-point belt, this may result in injuries or death of

the child.

Table of Contents