Safety In The Vehicle; Installing The Car Seat In The Vehicle - CYBEX JUNO M-FIX Instruction Manual

12

SAFETY IN THE VEHICLE

!
WARNING! The car seat must always be secured correctly with the vehicle
belt in the vehicle even when not in use. In case of an emergency brake or
accident, an unsecured car seat may injure other passengers or yourself.
In order to guarantee the best possible safety for all passengers make sure
that...
• foldable backrests in the vehicle are locked in their upright position.
• when installing the car seat on the front passenger seat, adjust the vehcile
seat in rearmost position.
• you properly secure all objects likely to cause injury in the case of an accident.
• that the car buckle is not reaching all the way to the impact shield.
In case of doubt contact the retailer or manufacturer.
• all passengers in the vehicle are buckled up.

INSTALLING THE CAR SEAT IN THE VEHICLE

Place the car seat on the appropriate seat in the vehicle.
• Always ensure that the entire surface of the backrest of the car seat is
placed fully against the backrest of the vehicle seat. The car seat must never
be in a lying position.
• If the headrest of the vehicle is in the way, pull it out all the way, or remove
it completely and store it safely (for exceptions to this, please refer to the
section "CORRECT POSITION IN THE VEHICLE"). The backrest will
perfectly adapt to practically any recline of the vehicle seat.
!
WARNING! The full surface of the backrest of the car seat must be
against the backrest of the vehicle. To ensure maximum protection for
your child, the car seat must be in a normal upright position!
!
WARNING! Do not use any load bearing contact points other than those
described in the instructions and marked in the child restraint.