Installing With Seat Belt Only - CYBEX SOLUTION M-FIX Owner's Manual

INSTALLING WITH SEAT BELT ONLY

First, refer to pages 13—14 for Vehicle Seat Location
Requirements.
Select a seat location allowed by your vehicle manufacturer
that is equipped with a THREE POINT LAP AND
SHOULDER BELT system.
With the LATCH connectors pushed in and stored away,
simply place the booster seat on the vehicle seat, making
sure that the Backrest is in full contact with the vehicle seat
back and does not interfere with the vehicle's headrest.
Route the shoulder belt behind the headrest until it rests
INSIDE the Shoulder Belt Guide.
RED
NEVER USE the Booster Base without the Backrest
attached.
NEVER USE a locking clip when installing this
booster seat.
The REAR SEAT is the safest location for a properly
installed booster seat.
18