Uniden TXC400 Owner's Manual page 9

This cordless telephone must be set up before use. Follow these steps:
Step 1
(page 9)
Unpack the telephone and accessories.
Step 2
(page 10)
Secondly, choose the best location to set
up the base unit.
Step 3
(page 11 to 14)
Thirdly, insert the battery pack into the
handset. Connect the base unit. You must
charge the battery pack for 3-5 hours
before plugging into the phone line and
using the phone.
[ 8 ] G E T T I N G S T A R T E D
Step 4
(page 15 to 17)
Fourthly, set the Caller ID options, and store
your area code in the memory to use the Caller
ID service. Choose the language of your display.
Note: Skip the area code setting if your calling
area requires 10-digit dialing.
Step 5
(page 18)
Finally, install one of the headsets supplied
with your phone.
About the digital security code
This cordless telephone uses a digital
security code to prevent unauthorized
access to your base unit. This security
code prevents other cordless handsets
from making calls through your base unit.
If you want to reset the security code,
see page 44.