Table of Contents
Advertisement
CIDCW
• CIDCW setting is a universal setting. When the setting is changed on the original
handset, the CIDCW setting for the second handset is changed as well.
• CW Deluxe setting is independent from the original handset. To set the CW Deluxe setting
on the second handset, do the following.
1) When the phone is in the standby mode, press menu/mute.
2) Press
or
to move the pointer to "
+
-
then press select/ch.
3) Press
or
to select "
+
-
4) Press
or
to select "
+
-
then press select/ch. You will hear a confirmation tone.
Operation
Making and receiving calls
If you press talk/flash on the handset while the other handset is in use, you will hear
a beep and the handset will return to the standby mode.
Security code
You can change the digital security code, only from the original handset.
Memory locations (Redial memory/Dynamic memory locations)
Memory locations in the original handset and the second handset are independent.
Page
If you press any key on a handset while paging, the paging sound from the other handset
will stop as well.
Caller ID
• When you receive a CIDCW during a call, the Caller ID information will not be displayed
or stored in the other handset.
• To display CIDCW on the second handset, you must turn On the CIDCW or CW Deluxe on
the original unit.
Others
• You can't use or purchase the second handset as an alternative of the original handset.
• Save this owner's manual. The TXC400 owner's manual describes only the instructions
specific to the second handset. For detailed operation, refer to this owner's manual.
",
", then press select/ch.
" to active CW Deluxe features,
E X PA N D I N G Y O U R P H O N E
[ 43 ]
Advertisement
Table of Contents
