Long Distance Calls And Area Code Setting/Cancellation - Uniden TXC400 Owner's Manual

Calling a party from the Caller ID list
From Standby mode
1) Press . The summary screen appears. The screen shows
CID/ s
the number of new messages and the total number of messages.
2) Use the number keypad (
Caller ID message list.
3) Press . The displayed phone number dials automatically.
TALK/FLASH
From Talk mode
1) Press .
TALK/FLASH
2) Press . The summary screen appears.
CID/ s
3) View the Caller ID message you want to dial.
4) Press . The displayed phone number will be dialed.
SELECT/CH

Long Distance calls and Area Code Setting/Cancellation

While the incoming Caller ID information is displayed, pressing ✱
remove the prefix " " in the display to set the call for a long distance call, or pressing
will set or cancel an area code. (See page 16.)
Storing Caller ID messages in the Phonebook/RocketDial
Messages shown in the Caller ID list can be stored in the phonebook. Using the incoming
call information (i.e., Caller ID list), the phone number of the party on the Caller ID list
can be stored in memory.
1) When the phone is in the standby mode, while the incoming
Caller ID information is displayed, press
2) Press or to choose "
UP DOWN
locations) or "
cancel Storing, select "
- and ), , or to view the
2 9 0 UP DOWN
PB/ROCKET/
" (Phonebook
" (RocketDial location). To
".
will place or
/TONE
.
t
• You cannot make a call
from the Caller ID list if
your phone is connected
to a private branch
exchange (PBX).
• When a long distance
call has been set, " "
appears in the display.
• If a call comes in via a
telephone system that
does not offer Caller ID
service, no information
is stored.
#
C A L L E R I D [ 39 ]