Uniden TXC400 Owner's Manual page 16

There are three Caller ID setup options available: AutoTalk, CIDCW (Caller ID on Call Waiting),
and Area Code. See page 16 for Area Code setup instructions.
AutoTalk allows you to answer the phone without pressing
when AutoTalk is On, simply remove the handset from the base and the phone automatically
answers the call. Or if the handset is not in the base, press any number key, ✱
answer the call. If you set AutoTalk to Off, you must press
Caller ID on Call Waiting (CIDCW) performs the same as regular Caller ID on a call waiting
number. CW Deluxe allows you to handle call waiting calls in seven different ways. (See page 40)
You must subscribe to CIDCW from your phone company in order to use this feature.
The CW Deluxe is a separate service available through your phone company.
To change your Caller ID options:
1) When the phone is in the standby mode, press
2) Press or to move the pointer to
UP DOWN
" ", then press
3) Press or to choose "
UP DOWN
then press .
SELECT/CH
4) Press or to change the selection.
UP DOWN
AutoTalk: "
CIDCW: " ", "
5) Press , and you will hear a confirmation tone.
SELECT/CH
6) Press to exit.
END
MENU/MUTE
.
SELECT/CH
" or "
" or " "
" or "
. If the phone rings
TALK/FLASH
, or
/TONE
to answer the call.
TALK/FLASH
.
",
"
G E T T I N G S T A R T E D
to
#
[ 15 ]