Uniden TXC400 Owner's Manual page 29

If you select a speed
dial location where a
number is already
stored, the new number
will replace the old
number, and the old
number will be stored as
a phonebook location.
[ 28 ] P H O N E B O O K
2) Press , then "
SELECT/CH
3) Store the name (up to 16 characters) by using the number keypad.
• See the "Steps for entering names and special characters" (see page 29).
• Use and
s
CID/ PB/ROCKET/
• Use to delete characters as needed.
DEL/TRANS
• Press and hold
DEL/TRANS
If a name is not required, go to step 4.
4) Press to store the name, then
SELECT/CH
" " appears.
5) Press the number keypad to enter the phone number
(up to 20 digits), then press
6) "
move the pointer to one of the Distinctive Ring options, then
press .
SELECT/CH
If you choose not to store a "
the " " option.
7) " " appears. Then press
move the pointer to select the speed dial location
(10 locations: SPD1-SPD0).
If you choose not to store the name/number as a Speed Dial, simply
select the "
8) Press . You will hear a confirmation tone and
SELECT/CH
" " appears on the display.
" appears.
to move the cursor to the desired location.
t
to delete all the characters.
to store the number.
SELECT/CH
" appears. Then press or
UP
", simply select
or to
UP DOWN
" option.
to
DOWN