Table of Contents
Advertisement
Your phone supports up to 2 handsets (the original handset and the second handset). You
can now place a fully featured cordless handset anywhere AC power is available to connect
the handset charger. Additionally, you can transfer an outside call to another handset.
• We refer to the TXC400 handset as the second handset, and the TRUC46 handset as the original
handset in this section.
• Before using TXC400, charge the TXC400 battery pack for at least 15-20 hours, and register the
TXC400 handset to the TRUC46 base.
You need to register the second handset before using. To register the second
handset, do the following steps.
1) Unplug the AC adapter of the TRUC46.
2) Press and hold
on the TRUC46 base, while you plug in the AC Adapter, hold
PAGE
until the status LED on the base flashes.
3) Press
on the TXC400's handset. "
talk/flash
the operation is finished, you will hear a confirmation tone and "
" will appear. The status LED is no longer illuminated.
• If the registration fails, "
• You must complete the registration operation within 30 seconds, or the phone returns to the
standby mode.
" appears. When
" appears. Register the TXC400 again.
E X PA N D I N G Y O U R P H O N E
PAGE
[ 41 ]
Advertisement
Table of Contents
