Table of Contents
Advertisement
• The tone feature only
applies when the dial
mode is set to pulse.
• This special number can
be stored in a memory
location. This is referred
to as Chain Dialing. (See
page 35.)
[ 24 ]
B A S I C S
You can temporarily turn Off the microphone so that the person
you are talking with cannot hear you. During a telephone call
press and hold
MENU/MUTE
"
" appears on the display. Press
cancel muting.
If you press
to cancel muting, the call is disconnected and the
END
phone will return to standby mode.
Some telephone companies use equipment that requires pulse
dialing (sometimes referred to as rotary dialing). If you need to
enter tone dialing digits, you can switch-over to tone dialing
during the call. For example, entering your bank account number
after you have called your bank.
Initially make your call with the pulse dialing mode. Once your
call connects, press ✱
/TONE
digits will be sent as tone dialing. Once the call ends, the tone
mode is canceled and pulse dialing mode resumes.
to turn Off the microphone, and
again to
MENU/MUTE
. Enter the desired number. These
Advertisement
Table of Contents
