Chain Dialing - Uniden EXI2970 Series Manual

EXI2970 ENG-0719 7/18/01 19:51
Memory dialing from Talk Mode
1) Press talk . ¨
2) Press m .
3) Enter a number (0 - 9) to select the memory location of
4) To hang up, press talk .

Chain Dialing

[ 24 ] M E M O R Y D I A L I N G
Page 24
¨ and the
Talk
volume setting appears.
the desired phone number. The selected phone number is
displayed. Then the number is dialed.
The 10 memory locations on the handset are not limited to phone numbers. You
may want to store in memory a group of numbers (up to 20 digits) that you need
to enter once your call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank,
when you are prompted to enter the account number, simply press m and then
the location where the special number has been stored.
Store your special number with identifying name in memory as you would a phone
number. (Refer to "Storing Phone Numbers and Names" on page 19.) Enter a
pause as necessary in the sequence.
A pause counts as one digit and represents a two second delay in time between
digits as they are sent.
Talk Talk
Volume High
Talk
Talk
0123456789012
0:00
0:35