Video/Monitor Menu - Sony HDCU5000 Operating Instructions Manual

VIDEO/MONITOR Menu

VIDEO/MONITOR
Page name Item
Page No.
<COLOR BAR> 4K/HD-BAR SELECT
V01
SD
BAR-CHARACTER
MOVING SYMBOL
2SI DIAMOND MARK
Set value
BAR 16:9(100%), BAR 16:9(75%),
SMPTE 16:9(BLACK), SMPTE
16:9(–I/Q), BAR 4:3(100%), BAR
4:3(75%), SMPTE 4:3(BLACK),
SMPTE 4:3(–I/Q), MF-ARIB(75%),
MF-ARIB(100%), MF-ARIB(+I),
MF-SMPTE(–I,Q),
MF-SMPTE(75%,Q),
MF-SMPTE(100%,Q),
MF-SMPTE(+I,Q), HD-CUSTOM,
SDI CHECK FIELD, Y-RAMP,
Y/C-RAMP, HD-CUSTOM2
MF-CB MODIFY, EVEN
SLOPE WIDE, NARROW
SOURCE 4K/HD BAR, SD BAR
SELECT When SYSTEM CONFIG menu t
<MULTI FORMAT> page t
SYSTEM is set to 1.001(525):
SMPTE, EIA, FULL, 95%,
NTSC100%, Y/C-RAMP, Y-RAMP
When SYSTEM CONFIG menu t
<MULTI FORMAT> page t
SYSTEM is set to 1.000(625):
SMPTE, EIA, FULL, 95%,
PAL100%, Y/C-RAMP, Y-RAMP
ON, OFF
ON, OFF
TYPE 0, 1, 2
SIZE SMALL, LARGE
ON, OFF
Description
Selects the color bars for 4K output/HD output.
Sets the stripe width for multi-format color bar output.
MODIFY: Stripe width adjusted to prevent colors
mixing in 4:3 Edge crop mode.
EVEN: Stripe width in accordance with standard.
Sets the color difference signal band of the color
bars.
WIDE: Band not limited.
NARROW: Band is limited to prevent ringing.
Selects the color bar signal source for output to SD.
4K/HD BAR: Down converts the 4K/HD color bars
and then outputs it.
SD BAR: Outputs the SD color bars selected in
SELECT.
Selects the SD color bars.
Sets the character superimposition on the color bar
signal.
Sets symbol moving on the color bar screen.
Selects the symbol type.
Selects the symbol size.
Sets the marker display for 4K 2SI output.
This function is for displaying a test pattern like the
following in the area at the bottom right of the 4K
color bar during 4K 2-sample interleave output. OK is
displayed if the connections for Links 1 to 4 are
correct, and OK is not displayed if they are incorrect.
This function can be used to check the connections.
66
Correct connections
When Link 1 and
Link 2 have been
swapped