Sony HDCU5000 Operating Instructions Manual page 33

SYSTEM CONFIG
Page name Item
Page No.
<MULTI FORMAT> SYSTEM
S05
CAMERA FORMAT
BIT DEPTH
Set value
1.001(525), 1.000(625)
When FIBER TRANSMIT RATE is
set to ULTRA and 1.001(525) is
selected in SYSTEM:
3840×2160/59.94P(2×),
3840×2160/59.94P,
3840×2160/29.97P,
3840×2160/23.98P, 1080/59.94P,
1080/29.97PsF, 1080/23.98PsF,
1080/59.94I (RGB444),
1080/29.97PsF (RGB444),
1080/23.98PsF (RGB444),
1080/59.94P(2×), 1080/59.94P(3×),
1080/59.94P(4×), 1080/59.94P(6×),
1080/59.94P(8×)
When FIBER TRANSMIT RATE is
set to ULTRA and 1.000(625) is
selected in SYSTEM:
3840×2160/50P(2×),
3840×2160/50P, 3840×2160/25P,
3840×2160/24P, 1080/50P,
1080/25PsF, 1080/24PsF,
1080/50I (RGB444),
1080/25PsF (RGB444),
1080/24PsF (RGB444),
1080/50P(2×), 1080/50P(3×),
1080/50P(4×), 1080/50P(6×),
1080/50P(8×)
When FIBER TRANSMIT RATE is
set to HIGH and 1.001(525) is
selected in SYSTEM:
UHD/59.94P (4K/HDR),
1080/59.94P (4K/HDR),
1080/59.94P, 1080/59.94I,
1080/29.97PsF, 1080/23.98PsF,
720/59.94P,
1080/59.94I (RGB444),
1080/29.97PsF (RGB444),
1080/23.98PsF (RGB444),
1080/59.94I(2×), 720/59.94P(2×)
When FIBER TRANSMIT RATE is
set to HIGH and 1.000(625) is
selected in SYSTEM:
UHD/50P (4K/HDR),
1080/50P (4K/HDR),
1080/50P, 1080/50I, 1080/25PsF,
1080/24PsF, 720/50P,
1080/50I (RGB444),
1080/25PsF (RGB444),
1080/24PsF (RGB444),
1080/50I(2×), 720/50P(2×)
10BIT, 12BIT
33
Description
Selects the operating frequency of the system.
Selects the system format.
Note
The formats available for selection vary depending
on the active format of the connected camera.
Sets the RGB4:4:4 output bit length, and changes
the CCU output format.
This can be selected only when CAMERA FORMAT
is set to 1080/59.94I (RGB444), 1080/29.97PsF
(RGB444), 1080/23.98PsF (RGB444), 1080/50I
(RGB444), 1080/25PsF (RGB444), or 1080/24PsF
(RGB444).