Connecting The Ccu-550A/550Ap To The Video Camera - Sony CCU-550A Operation Manual

Connecting the CCU-550A/550AP to the Video Camera

CCU-550A/550AP
Notes on connections
When connecting a CCU-550A/550AP to a BVP-550/570/950/950P Color
Video Camera, you must first attach the CA-550/550P/570/570P Camera
Adaptor to the video camera.
A large lens and the BVF-77/77CE 7-inch Viewfinder are connected to the
CCU-550A/550AP through the CA-905K/F series large-lens adaptor and
the BKP-9057 Viewfinder Saddle, as shown in the illustration below.
Triax cable
.
To an AC power source
Triax cable
The triax cable should never be connected to or disconnected from the
CCU-550A/550AP when the power is turned on. Always turn the unit off
first.
Video camera
Some switches or controls on the video camera may not work when the
camera is connected to the CCU-550A/550AP.
For details, refer to Operation Manuals of the video camera and the camera
adaptor.
CA-550/550P/570/570P
When a large lens is used
BVF-77/77CE
BKP-9057
CA-905K/F
Notes
• The maximum power output from the CAMERA connector of the
CCU-550A/550AP is 110 watts (including a maximum cable
loss of 10 watts). Do not connect any equipment which
consumes more than 110 watts of power.
• The BVF-7700/7700P Color Viewfinder cannot be used
because of the power output rating mentioned above.
• When the BKP-5974 DC Power Unit is connected to the CCU-
550A/550AP, the CA-905K/F large-lens adaptor cannot be
used.
BVP-550/570/950/950P
CA-570/570P
BVP-550/570/950/950P
9(E)