Sony HDCU5000 Operating Instructions Manual page 42

SYSTEM CONFIG
Page name Item
Page No.
<OUTPUT FORMAT4> UHD-SDI E
S10
Displayed only when
HKCU-SDI50 is installed.
UHD-SDI F
Set value
MONITOR C
FORMAT FIBER TRANSMIT RATE is HIGH
and SYSTEM is 1.001(525): see
page 54
FIBER TRANSMIT RATE is HIGH
and SYSTEM is 1.000(625): see
page 56
FIBER TRANSMIT RATE is ULTRA
and SYSTEM is 1.001(525): see
page 58
FIBER TRANSMIT RATE is ULTRA
and SYSTEM is 1.000(625): see
page 62
OETF SDR, 4K OETF
COLOR BT709, BT2020
MONITOR C
FORMAT FIBER TRANSMIT RATE is HIGH
and SYSTEM is 1.001(525): see
page 54
FIBER TRANSMIT RATE is HIGH
and SYSTEM is 1.000(625): see
page 56
FIBER TRANSMIT RATE is ULTRA
and SYSTEM is 1.001(525): see
page 58
FIBER TRANSMIT RATE is ULTRA
and SYSTEM is 1.000(625): see
page 62
OETF SDR, 4K OETF
COLOR BT709, BT2020
Description
Sets the output of the UHD SDI E connector.
Sets whether to add characters to the output signal.
C: Characters are not added.
Note
This is fixed to C.
Sets the output signal format of the UHD SDI E
connector.
Sets the gamma curve of the video output.
Selects the color space of UHD-SDI E video output.
BT709: Sets the color output format to BT709.
BT2020: Sets the color output format to BT2020.
Sets the output of the UHD SDI F connector.
Sets whether to add characters to the output signal.
C: Characters are not added.
Note
This is fixed to C.
Sets the output signal format of the UHD SDI F
connector.
Sets the gamma curve of the video output.
Selects the color space of UHD-SDI F video output.
BT709: Sets the color output format to BT709.
BT2020: Sets the color output format to BT2020.
42