Sony HDCU5000 Operating Instructions Manual page 73

MAINTENANCE
Page name Item
Page No.
<MENU SETTINGS> PAGE RESUME
M03
ALARM JUMP
CAMERA MENU
CTRL
<DATE&TIME> DATE (YEAR)
M04
DATE (MONTH)
DATE (DAY)
TIME (HOUR)
TIME (MINUTE)
TIME ZONE (HOUR)
TIME ZONE
(MINUTE)
<TALLY INPUT> R-TALLY
M05
G-TALLY
Y-TALLY
<ALARM SETTINGS> FORCE LEGACY
M06
CABLE OPEN
GENLOCK ERROR
<SDI ANCILLARY DATA> VIDEO PAYLOAD ID
M07
EMBED AUDIO
EMBED META DATA
<FRONT PANEL> ASSIGNABLE
SWITCH
M08
SIGNAL BAR
Set value
ON, OFF
ON, OFF
OFF, ON
17 to 99
1 to 12
1 to 31
0 to 23
0 to 59
–23 to +23, 0
0 to 59
CONTACT
CONTACT
CONTACT
OFF, ON
OFF, ON
OFF, ON
LATEST, 2002, 2010, 2011, 2017
OFF, ON
OFF, ON
NONE, BARS, CAM POWER,
FORCE LEGACY, OPTICAL
SIGNAL
DISPLAY OFF, ON
READY COLOR WHITE, GREEN, BARS
BRIGHTNESS LOW, MIDDLE, HIGH
Description
Turns the menu mode resume page display function
ON/OFF.
Turns the error-related page display function ON/
OFF for when an error occurs while in menu mode.
Displays the camera menu.
Notes
• If CAM MENU is set to ON, CCU menu operations
cannot be performed because only camera menu
operations are available.
• The camera menu is not displayed when SD signal
is output.
Sets the date and time.
Note
When this is changed, all logs stored on the unit will
be deleted.
Sets the time zone.
RED tally input setting
Note
This is set to CONTACT (fixed).
GREEN tally input setting
Note
This is set to CONTACT (fixed).
YELLOW tally input setting
Note
This is set to CONTACT (fixed).
Set to OFF to not display the FORCE LEGACY
alarm.
Set to OFF to not display the CABLE OPEN alarm.
Set to OFF to not display the GENLOCK ERROR
alarm.
Selects the standard year of the payload ID to be
added to the SDI VIDEO output.
Sets whether to embed audio in the SDI VIDEO
output.
Sets the function to be assigned to the assignable
button on the front panel.
NONE: No assignment.
BARS: Sets the color bar output to ON/OFF.
CAM POWER: Sets camera power to ON/OFF.
FORCE LEGACY: Forces the communication mode
to LEGACY mode.
OPTICAL SIGNAL: Turns the optical signal output
from the CCU to the camera ON/OFF.
Switches the signal bar display on the front panel.
Sets the color for the ready status (during color bar
output).
Sets the signal bar brightness level.
73