Sony HDCU5000 Operating Instructions Manual page 67

VIDEO/MONITOR
Page name Item
Page No.
<COLOR BAR> HFR CHANNEL
MARK
V01
<BAR CHARACTER> BAR CHARACTER
V02
ALL CLEAR
<CCU VIDEO> MONO COLOR
V03
<DOWNCONVERT> 4K-HD
DOWNCONVERT
V04
FILTER
SD ASPECT
NTSC SETUP
<MONITOR> CHARACTER LEVEL
V05
LEVEL GATE
GATE MARKER
ASPECT MARKER
Set value
ON, OFF
ON, OFF
PHASE 0 to 359, 0
SATURATION –99 to 99, 0
1, 2, 3, 4, 1(V:0.3), 1(V:0.6)
SQUEEZE, EDGE CROP,
LETTER BOX
7.5, 0 IRE
1, 2, 3, 4, 5
OFF, 1&2, 1, 2, (---)
Y-LEVEL1 MIN 0 to 108% 49
MAX 0 to 108% 61
LEVEL –99 to 99 –25
Y-LEVEL2 MIN 0 to 108% 74
MAX 0 to 108% 108
LEVEL –99 to 99 –25
OFF, ON, (---)
LEVEL –99 to 99 0
OFF, ON
SELECT 4:3, 13:9, 14:9, EU VISTA, VISTA,
CINEMA, FOLLOW DC
MODULATION ON/ OFF, ON
OFF
MODULATION –99 to 99 0
LEVEL
Description
Sets the character string to be displayed on each of
lines 1 to 16.
Clears all the character strings set for BAR
CHARACTER.
Turns the MONO COLOR function ON/OFF.
Sets the MONO COLOR function hue adjustment.
Sets the MONO COLOR function color level
adjustment.
Selects the type of filter for downconverting from 4K
video signals to HD signals.
Enabled when CAMERA FORMAT is set to UHD/
59.94P(4K/HDR) or UHD/50P(4K/HDR).
Selects the aspect ratio for SD output.
Sets the NTSC signal setup level.
Sets the brightness of text in menus, etc.
Sets level gate display.
OFF: Level gate is not displayed.
1: Displays level gate 1.
2: Displays level gate 2.
1&2: Displays level gate 1 & 2.
(---): Displayed when a camera is not connected
(Display only).
Sets the minimum detection level for level gate 1
display.
Sets the maximum detection levels for level gate 1
display.
Sets the zebra display level to be added to the
detection area.
Sets the minimum detection level for level gate 2
display.
Sets the maximum detection levels for level gate 2
display.
Sets the zebra display level to be added to the
detection area.
Sets the display of the gate signal detected by the
camera.
OFF: Gate signal is not displayed.
ON: Displays zebra in the area (skin gate, etc.)
detected by the camera.
(---): Displayed when a camera is not connected
(Display only).
Sets the zebra display level to be added to the
detection area.
Sets aspect marker display.
Selects the marker type.
Sets the mask function for outside the marker frame.
Sets the mask level.
67