Avaya 3616 Installation And Configuration Manual page 19

License Management License Management
License Management lets you select the VoIP protocol that your site is licensed to License Management lets you select the
The CCMS Protocol to use for the 3616/26 Wireless Telephones is The CCMS Protocol to use for the 3616/26 Wireless Telephones is
the Wireless Telephone to malfunction. the Wireless Telephone to malfunction.
Press 0 0 to view the current s
1. 1. Press
Press 0 0 to change the protocol.
2. 2. Press
3. 3. Press the right arrow to scroll through the options. Press the right arrow to scroll through the options.
Press 0 0 to select the displayed protocol number.
4. 4. Press
After selecting the correct protocol for your site, you After selecting the correct protocol for your site, you should upgrade the software for the phones.
Upgrading Wireless Telephones section for more information. Upgrading Wireless Telephones
Restore Defaults Restore Defaults
The Restore Defaults option will set all user and administrative parameters to their factory defaults. The Restore Defaults option will set all user and administrative parameters to their factory defaults.
During configuration, press Right Arrow to skip this mode. During configuration, press Right Arrow to skip this mode.
Site Survey Mode Site Survey Mode
Site Survey Mode is used t Site Survey Mode is used to check the signal strength from
Survey Mode, the Wireless Telephone wil Survey Mode, the Wireless Telephone will remain in this
configuration, press Right Arrow to skip this configuration, press Right Ar
(Section 7) for more information on this mode. (Section 7) for more information on this mode.
Re Regul gul atory Domain atory Domain
The Regulatory Domain will default to North America on the Wireless Telephone display. FCC The Regulatory Domain will default to
requirements dictate that the menu for changing the domain be available by password, which in our requirements dictate that the menu for changing the domain be available by password, which in our
case is the case is the LINE LINE
site's domain. Note that both digits must be entered. site's domain. Note that both digits must be entered.
01 01
02 02
03 03
04 04
05 05
Note: as of this writing, Spain and France are adopting the general European Regulatory rules. Check Note: as of this writing, Spain and France are adopting the general European Regulatory rules. Check
with your wireless LAN administrator or supplier for which domain to enter in these countries. with your wireless LAN administrator or supplier for which domain to enter in
555-301-107, Issue 555-301-107,
May 2004 May 2004
to view the current selection. election. The protocol number appears on the displ
to change the protocol.
to select the displayed protocol number.
section for more information.
o check the signal strength from access points.
row to skip this mode.
button. To change the domain, press button. To change the domain, press
- North America - North America
- Europe (except Spain and France) - Europe (except Spain and France)
- Japan - Japan
- Spain - Spain
– France – France
Issue 3 3
VoIP protocol that your site is licensed to download and run.
The protocol number appears on the display.
should upgrade the software for the phones. See
access points. When you select Site
l remain in this mode until it is mode until it is powered off.
mode. See Certifying the 3616/26 Wireles See Certifying the 3616/26 Wireless IP Telephone
North America on the Wireless Telephone display. FCC
LINE LINE and then enter the digits that represent the and then enter
3616/26 Wireless IP Telephone 3616/26 Wireless IP Telephone
Installation and Configuration Guide Installation and Configuration Guide
download and run.
009 009 . Any other protocol will cause . Any other protocol will cause
ay.
When you select Site
powered off. During During
s IP Telephone
the digits that represent the
these countries.
See
19 19