Avaya 3616 Installation And Configuration Manual page 17

Wireless

Hide thumbs Also See for 3616:

Installation manual (76 pages)

Installation and configuration manual (46 pages)

User manual (31 pages)

Table Of Contents

Table of Contents

Regardless of the mode in which the Wireless Telephone is operating, the following components must

Regardless of the mode in which

be configured:

– the IP address of the

– the IP address of the Wireless Telephone. This is automatically assigned if DHCP is used.

Phone IP

If using Static IP configuration, you must obtain a unique IP address for each phone from your network

administrator.

AVPP IP

– the IP address of the Avaya Voice P

– the IP a

is simply the IP address of the Avaya Voice Priority Processor. Note that the Avaya Voice

is simply the IP address of the Avaya

Processor must be statically configured to have a permanent IP address. If DHCP is being used,

Processor must be statically configured to have a

Wireless Telephone will try the following, in order: the DHCP option 151, then a DNS

Wireless Telephone will try the following, in order: the DHCP o

"SLNKSVP2" if the DHCP options 6 (DNS Server) and 15 (Domain Name) are configured.

The following components may be configured optionally:

TFTP Server

TFTP S

erver IP IP

updating the Wireless Telephones. If this feature is configured (not set to 0.0.0.0 or 255.255

updating the Wireless Telephones. If this feature is configured (not

with either Static IP configuration or using DHCP option 66 (TFTP Server), or the Boot

with either Static IP configuration or using DHCP option

server (siaddr) field, the Wireless Telephone will check for newer software each time it is powered on

server (siaddr) field, the Wireless Telephone will check for newer software ea

or comes back into range of your network. This check takes only a second and ensures that all Wireless

Telephones in your network a

Telephones in your network are kept up-to-date with the same version of software.

OAI Server IP

simply the IP address of the NetLink OAI Gateway. If DHCP is being used, the Wireless Telephone

simply the IP address of the NetLink OAI Gateway.

will try the DHCP option 152.

Default

Defa

ult Ga

Gateway and

teway and Subnet Mask

includes routers. Both of these must be configured (not set to 0.0.0.0 or 255.255.255.255) for the

Wireless Telephone to contact any network components on a different subnet. They can be set using

either Static IP configuration or via DHCP options 3 (Default Gateway) and 1 (Subnet Mask)

either Static IP configuration or via DHCP options 3

respectively. Contact your network administrator for the proper settings for your network. Note that the

Wireless Telephones cannot "roam" across subnets, since they cannot change their IP address while

operational. Ensure that all your access points are attached to the same subnet for proper operation.

The Wireless Telephone can change subnets if DHCP is enabled, and the Wireless Telephone is

powered off then back on when within range of access points on the new subnet.

Call Server IP –

address of the Call Server.

address of the Call Server. If DHCP is being used, the Wireless Telephone will try the following, in

order:

order: DHCP Option 43 (Keyword MCIPADD

DHCP Option 43 (Keyword MCIPADD), DHCP Option 176 (Keyword MCIPADD

DHCP Option 6 (DNS Server) and

DHCP Option 6 (DNS Server) and Option 15 (Domain Name) are configured,

names found in the above options, and finally the DNS lookup of "AvayaCallServer.DOMAIN".

Call Server Port –

and is rarely changed.

and is rarely changed. The port number entered must

Call Server, otherwise the wireless phone will not be able to register with the Call Server. If DHCP is

being used, this can be changed via DHCP Option 43 (Keywork MCPORT) or DHCP Option 176

555-301-107,

555-301-107, Issue

May 2004

the Wireless Telephone is operating, the following components must

Wireless Telephone. This is automatically assigned if DHCP is used.

ddress of the Avaya Voice Priority Processor. If using Static IP configuration, this

Voice Priority Processor. Note that the Avaya Voice Priority

– the IP address of a TFTP server on your network that holds software images for

re kept up-to-date with the same version of software.

– the IP address of the NetLink OAI Gateway. If using static IP configuration, this

– the IP address of the NetLink OAI Gateway. If using static IP configuration, this is is

– used to identify subnets, when using a complex network which

Subnet Mask

the IP address of t

the IP address of the Avaya Call Server.

he Avaya Call Server. If using Static IP

If DHCP is being used, the Wireless Telephone will try the following, in

Option 15 (Domain Name) are configured, DNS lookup of server

the IP port address of

the IP port address of the Avaya Call Server.

The port number entered must be coordinated with the administration

Issue 3 3

riority Processor. If using Static IP configuration, this

permanent IP address. If DHCP is being used, the

ption 151, then a DNS lookup of

66 (TFTP Server), or the Boot server/next

If DHCP is being used, the Wireless Telephone

(Default Gateway) and 1 (Subnet Mask)

If using Static IP configuration, this is

), DHCP Option 176 (Keyword MCIPADD), and if

the Avaya Call Server. This port normally defaults

This port normally defaults to 1719,

be coordinated with the administration of the

3616/26 Wireless IP Telephone

Installation and Configuration Guide

lookup of

set to 0.0.0.0 or 255.255.255.255)

server/next

ch time it is powered on

configuration, this is the IP

DNS lookup of server

Priority

the

.255.255)

the IP

), and if

to 1719,

of the

Table of Contents

This manual is also suitable for:

3626

Avaya 3616 Installation And Configuration Manual page 17

Related Manuals for Avaya 3616

Related Products for Avaya 3616

This manual is also suitable for:

Table of Contents