Avaya 3616 Installation And Configuration Manual page 15

5. 5. 36 3616
The Wireless Telephone can be automatically configured for IP address and/or ESSID by enabling The Wireless Telephone can be automatically configured for IP address and/or ESSID by enabling
DHCP and/or ESSID Learning, respectively. DHCP and/or ESSID Learning, respectively.
If any of the Wireless Telephone's default settings need to be changed, the If any of the Wireless Telephone's default settings need
be followed. be followed.
Ope Opening ning and Using the Adm
The Admin menu contains configuration options that are stored locally (on each The Admin menu contains configuration op
Every Wireless Telephone is independent and if the default settings are not desired, the Every Wireless Telephone is independent and
must be set in each Wireless Telephone requiring different settings. must be set in each Wireless Telephone requiring different settings.
1. 1. With the Wireless Telephone powered OFF, simultaneously press and hold the With the Wireless Telephone powered OFF, simultaneously press and hold the
Start Call Start Call
2. 2. After hearing two beeps, release the After hearing two beeps, release the
End Call End Call
3. 3. Press the left or right arrow keys Press the left or right arrow keys
menu options. menu options.
4. 4. Press Press
5. 5. Press Press
6. 6. Press Press
An asterisk (*) next to an option indicates that it is selected. The default settings are shown below with An asterisk (*) next to an option indicates that it is selected. The default settings are shown below with
an * prior to the option. an * prior to the option.
The following table lists the Admin menu items. Detailed descriptions of each item appear below the The following table lists the Admin menu
table. table.
555-301-107, Issue 555-301-107,
May 2004 May 2004
16/2 /26 6 W W ir ireless eless IP IP T T elepho
and Using the Admin in Me
and and
Power Off / End Call Power Off / End Call
key. The first option key. The first option on the Admin
If an admin password has been set, the display will require its entry before If an admin password has been set, the display will require its entry before
opening the Admin menu. If n opening the Admin menu. If no password is set, the display will proceed
directly into the Admin menu. directly into the Admin menu.
(zero) to change the selected option. (zero) to change the selected option.
0 0
to return to the previous menu level. to return to the previous menu level.
FCN FCN
Power Off / End Call Power Off / End Call to exit the menus. to exit the menus.
Issue 3 3
elephone ne Conf
to be changed, the following procedure should
Menu nu
tions that are stored locally (on each Wireless Telephone).
if the default settings are not desired, the admin options
keys. keys.
Power On / Start Call Power On / Start Call
on the Admin menu displays. menu displays.
o password is set, the display will proceed
and and ) on the Wireless Telephone to scroll through the ) on the Wireless Telephone to scroll through the
(# (# * *
items. Detailed descriptions of each item appear below the
3616/26 Wireless IP Telephone 3616/26 Wireless IP Telephone
Installation and Configuration Guide Installation and Configuration Guide
Config igur uratio ation n
following procedure should
Wireless Telephone).
admin options
Power On / Power On /
key, then release the key, then release the
Power Off / Power Off /
15 15