Table of Contents
Advertisement
7
Installing Hydraulic Lines
1, 2, and 5
Parts needed for this procedure:
1
Hydraulic cap
1
Hydraulic line number 1
1
Hydraulic line number 2
1
Hydraulic line (hose) number 5
Procedure
Use
Figure 14
for identifying the correct hydraulic
lines.
Figure 14
1. Hydraulic line number 1
2. Hydraulic line number 2
3. Hydraulic line number 3
Note:
Install all hydraulic lines loosely first and then
tighten them when everything is installed.
1.
Install the hydraulic cap onto hydraulic line
number 1, port 1b.
2.
Position hydraulic line number 1 into the
machine as shown in
3.
Install hydraulic line number 1 to the tee fitting
assembled to the side of the valve
4.
Install the hydraulic line number 1 to the upper
male coupler
(Figure
4. Hydraulic line number 4
5. Hydraulic line (hose)
number 5
Figure
15.
(Figure
15).
15).
1. Tee fitting on the side of
the valve
2. Valve
3. Hydraulic line number 1
5.
Position hydraulic line number 2 into the
machine as shown in
6.
Install hydraulic line number 2 to the tee fitting
assembled to the 90-degree elbow and the top
of the valve
7.
Install hydraulic line number 2 to the upper
female coupler
g015920
1. Valve
2. Tee fitting assembled to
the 90-degree elbow
3. Hydraulic line number 2
8.
Loosely install hydraulic line (hose) number 5 to
the lower male coupler
Note:
The other end of this hose will be
installed in Procedure 10.
9
Figure 15
4. Upper male coupler
5. Coupler bracket
Figure
16.
(Figure
16).
(Figure
16).
Figure 16
4. Upper female coupler
5. Coupler bracket
(Figure
17).
g003608
g003607
Advertisement
Table of Contents
