Table of Contents
Advertisement
8.
Install the hydraulic hose with fittings to the
fitting on hydraulic line number 2 as shown in
Figure
29.
1. Valve
2. Fitting on hydraulic line
number 2
9.
Install the hydraulic hose with fittings to the
45-degree elbow attached to the hydraulic pump
(Figure 30
and
Figure
Note:
It will be below the hydraulic cylinder.
1. Fitting on hydraulic line
number 2
2. Hydraulic hose with fittings 4. Hydraulic pump
10.
Refer to
Figure 31
hoses and hydraulic lines to the hydraulic pump.
Figure 29
3. Hydraulic hose with fittings
31).
Figure 30
3. 45-degree elbow
for the correct locations of the
g219889
1. Hydraulic line number 3
2. Hydraulic hose with fittings 5. Hydraulic pump
3. Machine frame tube
11.
Slide the 2 small hose clamps onto the small
molded hydraulic hose
12.
Install the long leg of the molded hose onto the
90-degree tee in the hydraulic tank
13.
Install the short leg of the molded hose onto the
barb end of hydraulic line number 4
14.
Tighten the two small hose clamps on each end
of the molded hose.
15.
Loosely install the hydraulic line (hose) number
5 to the small 90-degree tee
g003613
14
Figure 31
4. Large hydraulic hose
6. Coupler bracket
(Figure
32).
(Figure
(Figure
(Figure
32).
g003840
32).
32).
Advertisement
Table of Contents
