Gree GMV-ND07PLS/A-T(U) Service Manual page 42

Multi Variable Air Conditioners Indoor Unit for North America
LED graphics of wired controller
No. Symbols
1 *
2
3
*
4
5
6
7
8
9
*
10
*
11
12
*
13
14
15
16
17
Table LCD display instruction
Auto mode (Under Auto mode, the indoor units will automatically select their
operating mode as per the temperature change so as to make the ambient
comfortable.)
Up and down swing function
Cooling mode
Left and right swing function
Dry mode
It's valid under Save mode and displays during setting process.
Temperature lower limit for Cooling: Limit the minimum temperature value under
Cooling or Dry mode.
Temperature upper limit for Heating: Limit the maximum temperature value under
Heating, Space Heating or 3D Heating mode.
Fan mode
Heating mode
It shows the setting temperature value (In case the wired controller is controlling a
Fresh Air Indoor Unit, then the temperature zone will display FAP)
Floor Heating mode (When Heating and Floor Heating simultaneously shows up, it
indicates 3D Heating is activated.)
Space Heating mode
Sleep status
Air status, Indoor unit optional function
When inquiring or setting project number of indoor unit, it displays "NO." icon
Quiet status (including Quiet and Auto Quiet two status)
Display "SET" icon under parameter setting interface
Light On/Off function
36
Instructions