High Static Pressure Duct Type Indoor Uint - Gree GMV-ND07PLS/A-T(U) Service Manual

6. Remove
reversion loop
and centrifugal
blade

4.5 High Static Pressure Duct Type Indoor Uint

NOTICE! The following steps are specific for GMV-ND18PHS/A-T(U) units. For other units, the
assembly and disassembly procedure is similar except the specifications of centrifugal fans and motors.
Step
1. Remove the line
connecting to the
motor.
2. Disassemble the
seal plate and cover
plate.
3. Remove the
cover plate
component.
Multi Variable Air Conditioners Indoor Unit for North America
Motor and fan
Precondition: The power supply has been disconnected.
Diagram
●Remove 4 screws fixing the
reversion loop and then remove the
reversion loop' remove nuts on blade
and then remove the centrifugal
blade.
●Use a screwdriver to unscrew the
electric box cover.
●Remove from the master board the
line connecting to the motor and
remove the tie.
●Use a screwdriver to unscrew the
seal plate and cover plate and then
remove them.
●Use a screwdriver to unscrew the
cover plate component.
123
Operation Procedure