Wall Mounted Type Indoor Unit - Gree GMV-ND07PLS/A-T(U) Service Manual

Multi Variable Air Conditioners Indoor Unit for North America
5. Connect the
drainage duct and
screw the new
pump.
6. Install and
screw the water
tray.

4.3 Wall Mounted Type Indoor Unit

Step
1． Remove the
louver
2． Open the front
panel
3. Remove the
electrical box
cover 2
4. Remove the
front panel
assembly
1. Screw the outlet pipe
2. Screw the pump
Removal of Fan Motor
Remark: before removing, making sure power is disconnected.
Diagram
●Connect the drainage duct and use
a screwdriver to screw the new pump.
Tighten the screws
●Use a screwdriver to screw the
water tray.
●Take off the axle bush of the louver.
●Remove the louver.
●Hold the indents on both sides of the
panel and pull it out in the direction
shown by the arrow.
●Unscrew the screws fixing the
electrical box cover with a screwdriver.
Take off the box cover 2.
●Detach the ambient temperature
sensor from the conduit.
●Unscrew the screws fixing the front
panel assembly.
●Remove the front panel assembly.
120
Operation Procedure