Gree GMV-ND07PLS/A-T(U) Service Manual page 39

No. Symbols
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Multi Variable Air Conditioners Indoor Unit for North America
Table 2.1 LED display instruction
Up and down swing function
Left and right swing function
It's valid under Save mode and displays during setting process.
Temperature lower limit for Cooling: Limit the minimum temperature value under
Cooling or Dry mode.
Temperature upper limit for Heating: Limit the maximum
temperature value under Heating, Space Heating or 3D Heating mode.
Auto mode (Under Auto mode, the indoor units will automatically select their
operating mode as per the temperature change so as to make the ambient
comfortable.)
It shows the setting temperature value(In case the wired controller is controlling a
Fresh Air Indoor Unit, then the
temperature zone will display FAP)
Cooling mode
Dry mode
Fan mode
Heating mode
When inquiring or setting project number of indoor unit, it displ ays "NO." icon
Floor Heating mode (When Heating and Floor Heating
simultaneously shows up, it indicates 3D Heating is activated.)
Display "SET" icon under parameter setting interface
Space Heating mode
Display "CHECK" icon under parameter view interface
Outdoor unit operates under Save mode/upper limit of system capacitor less
100%/remote Save status
Sleep status
Current set fan speed (including auto, low speed, medium-low speed, medium
speed, medium-high speed, high speed and turbo seven status)
Air status, Indoor unit optional function
Remind to clean the filter
Quiet status (including Quiet and Auto Quiet two status)
Allow auxiliary electric heating On icon
Light On/Off function
33
Instructions