View Mode - User Option - Honeywell NOTIFIER ID61 Operating Manual

ID61/62 Series Panel - Operating Manual
5
4
or
2 8

4.12 View Mode - User Option

The VIEW MODE User Option allows the user to view
the following system parameters:
a. Log
b. Devices on the loop
c. Faults
d. Input Events
e. Disablements on the loop
f. Maintenance Log*
g. Alarm Count
h. Voltages
i. Version (system and loop software)
* Requires access level 3 passcode.
To display the View Mode menu:
1 From the 'Status: NORMAL' message, press the '
button. The LCD prompts for a Level 2/3 access code.
ACCESS TO MENUS RESTRICTED
Enter Level 2/3 Passcode: . . . .
Note: If an incorrect access code is entered, the LCD
displays an
PASSCODE ! ! !'. After one minute the LCD returns
to the 'Status: NORMAL' message.
2 Either turn the keyswitch or, using the numeric keypad,
enter the correct Level 2 access code and confirm
using the ' ' button. The Level 2 menu is displayed
5
with the user number ([U0] to [U9]) in the top left-hand
corner.
[U0] 1:Test 2:Disable/Enable
4:View Mode
3 Using the numeric keypad, press the '
select the View Mode menu:
[U0 View] 1:Log 2:Devices
4:Input Events 5:Disabled
4 Press the ' /
2
options:
[U0 View] 6: Maint.
8: Voltages
37
< : BackSp
'ERROR - INCORRECT
3:Clock
5:Commission 6:Print
4
3:Faults
: More
' buttons to display further menu
8
7: Alarm Count
9: Version : More
997-458-000-8, Issue 8
January 2010
'
' button to