Version - User Option; Commissioning; Print - User Option - Honeywell NOTIFIER ID61 Operating Manual

8
[U0 VERSION] System
Loop
997-458-000-8, Issue 8
January 2010
ID61/62 Series Panel - Operating Manual

4.12.8 Version - User Option

The Version User Option allows the user to view the System
and Loop part numbers and revision levels used in the
system. To view the Versions, from the View Mode menu:
1 Using the numeric keypad, press the '
select the Versions display.
[U0 View]
8: Voltages
2 The LCD automatically displays the following. Press the
'
: nnn-nnn-nnn n.nn
: nnn-nnn n.nn
Part
Number

4.13 Commissioning

The Commissioning User Option is available to Level 3
users only (i.e. the Level 3 access code must be entered).
The Commissioning menu allows the engineer to
configure the system in preparation for handover.
For details concerning commissioning and configuring
the system, refer to 997-457, ID61/62 Series Panel -
Installation, Commissioning & Configuration Manual,
Sections 4 and 5.

4.14 PRINT - User Option

The print options available are as follows:
a. Internal printer
b External printer, terminal or PC via the RS232 port.
The menu options are available to either printer configuration.
However, in instances where an internal printer is fitted and
connection to external equipment is also required, the menu
options only apply to the internal printer. The external printer
will still be capable of printing logged data.
The Print option allows the user to print specified events. The
option is available from the User Option menu only if a printer
is fitted:
[U0] 1 : Test
4 : View Mode
At access Level 2 (keyswitch turned or correct access
code entered, see Section 4.1.3), from the User Option
menu press the '
[U0 PRINT]
44
6: Maint. 7: Alarm Count
9: Version
' button to cancel and return to the View Mode menu.
4
Revision
Level
2 : Disable/Enable
5 : Commission
' button. The Print menu is displayed:
6
1 : Log 2 : Disablements
3 : On-Demand 4 : Maintenance
' button to
8
: More
3 : Clock
6 : Print