View Mode - User Option - Honeywell Notifier ID60 Series Operating Manual

ID50 Series Panel - Operating Manual
5
4
or
2 8

4.12 View Mode - User Option

The VIEW MODE User Option allows the user to view
the following system parameters:
a. Log
b. Devices on the loop
c. Faults
d. Input Events
e. Disablements on the loop
f. Maintenance Log (ID60 only - requires access level 3)
g. Alarm Count
h. Voltages
i. Version (system and loop software).
To display the View Mode menu:
1 From the 'Status: NORMAL' message, press the '
button. The LCD prompts for a Level 2/3 access code.
ACCESS TO MENUS RESTRICTED
Enter Level 2/3 Passcode: . . . .
Note: If an incorrect access code is entered, the LCD
displays 'ERROR - INCORRECT PASSCODE ! ! !'.
After one minute the LCD returns to the 'Status:
NORMAL' message.
2 Either turn the keyswitch or, using the numeric keypad,
enter the correct Level 2 access code and confirm using
the ' ' button. The Level 2 menu is displayed with the
5
user number ([U0] to [U9]) in the top left-hand corner.
[U0] 1 : Test 2 : Disable/Enable
4 : View Mode
3 Using the numeric keypad, press the '
select the View Mode menu:
[U0 View] 1: Log 2: Devices
4: Input Events 5: Disabled
4 Press the ' /
2
options:
[U0 View] 6: Maint.*
8: Voltages
* ID60 panels only
37
< : BackSp
3 : Clock
5 : Commission
4
3: Faults
: More
' buttons to display further menu
8
7: Alarm Count
9: Version : More
997-264-000-10, Issue 10
January 2010
'
' button to