UCC / AVAYA one-X Speech
features
Configuring the PBX
to integrate
UCC / Avaya one-X Speech - Avaya IP 600 / G3 / S8700 / S8300 E1 QSIG
4.0
Supported Features
UCC / AVAYA one-X Speech provides a telephone speech user interface to
Microsoft Exchange information. Using speech recognition and text-to-speech
technology, UCC / AVAYA one-X Speech communicates with callers in spoken
English, giving them telephone access to most of the functions available from their
desktop Outlook software. Using UCC / AVAYA one-X Speech, mobile
professionals can manage electronic communications and access business computer
resources through any telephone. Specifically, UCC / AVAYA one-X Speech
subscribers can call the system on a telephone and perform functions such as the
following:
•
Send and receive Voice and E-mail messages
•
Check, reply to, and forward Voice and E-mail messages
•
Make telephone calls and manage conference calls
•
Listen to Tasks and create new Tasks
•
Listen to Appointments and create new Appointments
•
Look up telephone numbers and addresses in the Outlook Contacts
folder or Global Address List
5.0
CONFIGURING THE PBX TO INTEGRATE
The following tasks must be completed when programming the PBX to integrate.
They are as follows:
•
Verify Optional, Q.SIG and Call Coverage Features
•
Create UCC / AVAYA one-X Speech Trunk Group
•
Configure the DS1 (E1) Circuit Pack
•
Create a Signaling Group
•
Create UDP Table
•
Create AAR Analysis Table
•
Create Route Pattern
•
Modify ARS Digit Conversion Table
•
Define Coverage Path
•
Define ISDN Numbering Format
•
Add Members to UCC / AVAYA one-X Speech Trunk Group
The above information is provided by AVAYA Inc. as a guideline. See disclaimer on page 1
5
C o n f i d e n t i a l